|
|||||||||||||||||||||
|
|
||||||||||||||||||||||
|
|||||||||||||||||||||||
 The
PowerCart offers flexibility, performance
and value unequaled by any other system. This system uses self propelled
carts
traveling along a 1/2" high floor track that enables easy access into
your finishing area. Each PowerCart is independent, allowing it to easily
roll over and be removed off the track so you can add and remove carts
form the line at your convenience. You can stop a PowerCart at anytime
and the
second it touches something in its path it immediately comes to a gentle
stop. Attached to the track are magnetic Line Stops that activate a time
delay
switch
inside the
PowerCart. This adjustable time delay can be set from seconds to minutes.
The Line Stops are easily attached to the track and placed at any point
where you want the PowerCart to stop. Each PowerCart has
a side kick switch that you use to stop it. At
the end of the day or during breaks the operator deactivates the PowerCart
in the paint  booth and all other units line up behind it waiting for the
operator to return. A cart on demand switch allows the painter to determine
when a PowerCart is to enter the paint booth. Production is controlled
by the operator! PowerCarts travel between stations at 36 fpm so they
are always waiting on the operator. The faster your operator can finish
the task, the higher the daily output. A complete system can be installed
in 3 days and you can reconfigure your finishing system at anytime with
little cost. A pull cart is available to easily double your finish line's capability. Click below to see a schematic of a typical PowerCart installation or the pull cart.  |
 |
| Commercial Phone:
619-449-6623 Fax: 619-449-9844 |
Prime Heat
Systems
1844 Friendship Dr. El Cajon, CA 92020 |
For retail
sales or information: (866) 4Suntek
primeheat@aol.com |
